jump to navigation

OctoPi version 0.6 – Control your 3D printer securely over the internet August 26, 2013

Posted by GuySoft in diy, Electronics, Hamakor, ITU, linux, open source, programming.
Tags: , , , ,
20 comments
OctoPi new logo

OctoPi new logo

Hey all,

OctoPi has got a lot of support, and it has been great to see people are adopting it.

I have released a new version of OctoPi, which has the following new features:

  • Support for both Raspberry Pi camera and webcam. Depending on which you plug to the Pi (Thanks to Gina)
  • New version of OctoPrint with ACL support
  • OctoPrint now runs on HTTPS using HAProxy, allowing secure connection to your printer over the internet

Also, we had to change the logo due to it being the Raspberry Pi foundation trademark. Thanks for everyone on the google plus discussion (especially Janina).

Download the image here

Source code and project management is on github here

I will note it was pretty nice get in to this release PiCam support, since I have no camera it required collaboration of both Gina and me, meaning we have a distro now that probably can cope with more hardware than you would have in your average personal configuration.

Also thanks Matvin for the storage, and we also have another mirror lined up in case of a overload, which happened last time.

Enjoy everyone,

Guy

OctoPi – 3D Printer Web Server Distribution for the Raspberry Pi August 4, 2013

Posted by GuySoft in diy, Electronics, Hamakor, ITU, linux, open source, programming.
Tags: , , , , , ,
25 comments
OctoPi logoOctoPi logo

OctoPi logo

Update2: New mirror opened after Dropbox suspended my public links due to traffic. Download the image here.

Update: Dropbox have suspended my Public links due to “extreme traffic activity” so in a few hours I should be syncing the image to other mirrors. Other hosting would be appreciated!

Hey all,

I am happy to say that I am a backer of the Rigidbot 3D printer, (which you can pre-order already), I am expecting it to arrive in August. In the meantime, I have ordered a Raspberry Pi to play with and started visiting a local maker community known as XLN.

This led me to find a really cool project called OctoPrint, which lets you control 3D printers using a Raspberry Pi over a web interface, however people were not installing it on their Pis because there was no out-of-the-box solution. Today I am happy to announce that a solution is here! I give you Octoprint + Rapberry Pi = OctoPi. A raspberry Pi distribution which runs OctoPrint out of the box, with support for time-lapse video on webcams (there is also an experiential version in the works that supports streaming from a raspberry Pi camera).

Just dd the image on to an sd card, put the sd card in your Pi, boot it and connect to the network and printer, then point your browser to http://octopi.local and you have a fully functional 3D printer server! Plug in a webcam and can also make time-lapse videos. Just as simple as that. More details for windows users can be found on OctoPrint’s download page.

The OctoPi image can be downloaded here.

The sources are available on github, and could also serve as a framework to automatically build other Raspbian-based Raspberry Pi distributions.

Pull requests, forks and issue reports are welcome. Also it would be helpful if someone could help me mirroring, since currently the images are hosted on my Dropbox account.

Thanks to Gina, the developer of OctoPrint, for such a great software! PlugWash on #raspbian for the build tips and Richard Mitchell for the last touches to OctoPi’s logo.

Share and enjoy,

Guy

Running Your Android Phone/Tablet on a virtual machine January 5, 2013

Posted by GuySoft in Android, diy, Hamakor, linux, open source, Uncategorized.
Tags: , , , ,
5 comments
Android VM on Virtualbox

Android VM on Virtualbox

Hey all,

My phone has died, and was sent to repair. And since I have a complete backup of it, as explained in my last post, I thought I might try and emulate it on my laptop.

So in this post I’ll explain how to do just that. And one the side effects is that I can now use whatsapp on my PC!

What you will need

  1. A backup of your phone that was done with Titanium BackupFollow my previous post on how to do that. Note that for Titanium Backup to run you need to root your phone.
  2. A computer that is running virtual box and virtualbox-fuse – I will show how to do this in Linux, but windows and Mac can do this too.
  3. A copy of AndoVM – This is the reason we can do this, since android by default does not come with an Ethernet drivers and AndroVM is compiled and distributed to run on virtualbox out of the  box (pun intended).

(more…)

SvxlinkWrapper – Wrapper for SvxLink to provide additional functionally such as QSO logging and auto-connect May 17, 2012

Posted by GuySoft in Hamakor, ITU, linux, open source, programming, python.
Tags: , , , ,
9 comments

Hey all,

A short post to announce a small piece of software I released today on github for the ham radio people.
I give you SvxlinkWrapper, this wrapper sits on top of Svxlink‘s stdout and stdin and processes it with python. Making it easy to add more advance features to Svxlinik. Since Svxlink is written in C++ and takes a while to compile, this wrapper really speeds up development. Furthermore, it uses straight.plugin making its simple to write more modules by extending SvxlinkwrapperModule and placing it in the modules folder.

Currently the to modules that SvxlinkWrapper has are for auto-connect to Echolink nodes on startup and another for a QSO logger for Echolink connections. There is also a module that should let you send commands over the Echolink chat, if you extend it. This lets me open and close repeater connections directly from the Echolink chat box.

Thats it for today, now that I have more free time, I hope to publish more things, 73

Cheap USB interface to connect Ham radios and other devices to the PC October 14, 2011

Posted by GuySoft in Crictor, diy, Electronics, Hamakor, ITU, linux, open source, wireless.
Tags: , , , , ,
12 comments

Ham radio PC interface

Hi all,
As promised in my last post, I have finally finished designing and building a cheap interface to connect ham radios or any other audio device that does not share audio common ground to a PC, including a PTT interface. Price should be around $17 or 60 NIS.  The control is done using a USB interface, so unlike most ham radio hardware that uses serial connections, this one is plug and play in modern PCs. The neat thing is that it uses them same commands as a RigBlaster. So this interface works out of the box with common ham radio programs like Echolink and Svxlink. The interface should also work with soundmodem which can be used for X.25 packet digital communications, without any extra hardware (I am still trying to get this to work). This interface could also be used to connect to other devices that don’t share a common ground. For example like phone lines.

Parts you will need

  1. TTL USB Serial interface – The main part is a simple CP2102 $4 controller that can be percussed from ebay. It simulates a serial device, meaning you can still work with older pieces of software with it. Note though you need to solder a cable from the RTS pin on the board, because normally they don’t come with a pre-made pin.
  2. Audio line isolation transformer – This can be easily salvaged from any old dial-up modem. That’s how I get mine, it seems to be much easier to get them off old modems than finding them in electronics shops, plus they are so easily identifiable (just make sure not to break the contacts when you take them out, happened to me twice). If you can’t find any old dial-up modems you can get it from ebay. (more…)

Echolink Node Native on Linux with Svxlink, and a Cheap PTT Hardware Interface August 8, 2011

Posted by GuySoft in Crictor, diy, Electronics, Hamakor, ITU, linux, open source, programming, wireless.
Tags: , , , , , , , , ,
10 comments

The Jerusalem Echolink Node

The Jerusalem Echolink Node (4Z7GAI-R)

Hey all,

I recently got my amateur HAM Radio license from the Israel ministry of communication. My call sign is 4Z7GAI.

I have been working on getting an Echolink node running on the Jerusalem repeater using Linux. Echolink is a closed proprietary software that lets you connect ham radios to one another and key them across the Internet. Luckily someone wrote a FOSS program called Svxlink, which lets you connect to the Echolink network on Linux., A remote radio control with an echolink server, svxlink-server and an Echolink graphical client, Qtel. I am going to explain in this post how to get svxlink compiled and working (compiling is the hard part). I will also giving out here an Ubuntu package for the lazy ones among you.

I will also add a small section on the physical connection to the radio, an old Icom IC-02AT from the 80s (around my age). (more…)

TEDxRamallah – My first TED event and visit to Bethlehem April 20, 2011

Posted by GuySoft in Crictor, Hamakor, IGF, ITU.
Tags: , , , , ,
9 comments
Holding the x in TEDxRamallah

Holding the x in TEDx

Hey all,

Last Saturday I was at my first TEDx event at TEDxRamallah, which took place in Bethlehem. As a TED lecture lover this was a fantastic experience for me. Moreover, this is also the first time I classified as a “Jewish” Israeli citizen (As an atheist its somewhat confusing to refer to myself as such). This does put me in an unusual position slightly different from most people there. I will try and summarize my own experience in this special event. I feel its important to for me to relay what I see to both sides that rarely see eye to eye.

I shall summarize the talks that I found interesting to me: (more…)

Build your own Free SMS to Twitter gateway with open source tools and cheap hardware March 27, 2011

Posted by GuySoft in Crictor, diy, Electronics, Hamakor, IGF, ITU, linux, open source, programming, python.
Tags: , , , , , , , ,
19 comments
SMS Twitter Gateway

SMS Twitter Gateway logo

Hey all,

I am releasing here set of instructions and source that will enable anyone to set up a phone number, that if you SMS it, will post your massage on to your own twitter account. This service is called “Twiter SMS Gate”. The service handles multiple users, and should be easily modified to support other services like statusnet (and with a bit more code maybe even other social networks). The SMS hardware required is any cheap cellphone that can work with gammu-smsd (mine is a fake Nokia from India). Twiter SMS Gate also lets users easily register to it with their own cellphone.

I hope that people that like this idea would start hosting more SMS gates, as we create a wide network of those around the world. SMS Twitter Gate-IL , The Israeli Gate, has been running for a few weeks now and even got covered in the local media here.

The source is written in Python, which includes the phone hardware hooks, webserver, twitter client and database access.

Here is the cellphone used to run my server, just to show you how simple it is to do this, no super-expensive hardware required! (server is also my personal Linux-running PC:

Fake Nokia Cellphone acting as a dedicated SMS server

Fake Nokia Cellphone acting as a dedicated SMS server

If you have any kind of difficulty setting this up, please give me feedback, so we can make it as easy as possible.

3arabi – Arabic chat to English translator December 4, 2010

Posted by GuySoft in Crictor, Hamakor, ITU, open source, programming, python.
Tags: , , , , ,
31 comments
3arabi Logo

3arabi Logo

Hi  all,

As some might have noticed, Arabic speakers on the net use a form of writing called ‘Arabic chat‘ or 3arabi, which involves using Latin characters and Hindu-Arabic numerals to write words in Arabic. I wrote a small service called 3arabi that lets you translate this Arabic chat directly to English.

Apparently there are tools to do transliteration (converting Latin letters back to Arabic), and also translation. But nothing that does them both. That is why I wrote a small script that uses Google’s transliteration service and ‘Google Translate’. This does the job, but is not perfect, however, it does actually help me understand some messages.

The source is also available in GitHub (its in python). If anyone contributes better code I’ll merge it back to the service.

Thanks to Ira Abramov for hosting the service!

Thanks to Rajesh who wrote the transliteration API though after using it I moved to the javascript google tool with his help.

Thanks Muhammad Khatib who wrote Google Translate python API and for releasing it.

Enjoy,

Guy

Update: Google seem to be blocking the translation service, thinking its spam, if anyone knows how to contact them and asking them to lift that ban would be appreciated.

Using CHDK to photograph blackboards in University Courses August 5, 2010

Posted by GuySoft in Crictor, diy, Hamakor, ITU, linux, open source, programming, python.
Tags: , , , , , ,
6 comments
CHDK in University

CHDK used in university for capturing blackboards

Hi all,
During last semester I developed a set of scripts that lets me photograph pictures of the blackboards during my university courses, categorize them while I am taking them and automatically generate PDF document for each course week. Because physics equations are not the simplest things to input in to a laptop in realtime, I have developed the following method. I am writing the post because I have a feeling this tool could help people in many ways, since it did change how I study in lectures.

You can see my blackboard photographs here (and here is a simple pdf example, if you get lost in the Hebrew).

How it works in a nutshell

The Work Flow

The work flow - photograph, store, generate pdfs

During the lesson I take the photographs of the blackboard with a script I wrote for CHDK. In the script you set the course and week of the semester and this is stored per-picture on the SD card.
(more…)

Follow

Get every new post delivered to your Inbox.